Conmunication configuration Wizard
Now it is simple to setup easymeeting™ for a correct connection with the server. To do this, click on the Communication configuration Wizard on the first screen of the Client Configurator.
• After a welcome message, the Server Configuration window will open.
Server configuration interface’s options
At this point, if it is necessary to change the easymeeting™ server, click NO and select the correct one. Otherwise, click YES.
• The next window will be the configuration of the type of connection.
• In this window you can choose the type of connection to the server, whether manual or automatic. If you want to change the default (automatic) click NO and change to manual. In general, easymeeting™ is set to automatic to test various configurations of the network (in this case you continue the configuration passing here); but if you connect to the internet using a proxy server or the ports 60.000 udp and 8010 tcp the firewall will not accept traffic entry/exit, so it is good to set the manual and answer to the following questions, to correctly configure the connection.
Please, consider that:
o Fbk protocol communicates with the TCP and UDP protocol, requires the opening of ports on the firewall (60.000 UDP and 8010 TCP, which must be set to accept the inbound and outbound traffic);
o Web protocol communicates with the normal http internet protocol.
•
As always, you can set the connection method by modifying the standard.
By clicking YES, we continue to the part on the configuration of proxy, if your system is linked with the web mode. Naturally it is possible to modify or maintain the current configuration of the proxy server.
• At the end, the usual window confirms the settings of all the considered elements so far:
Connectivity Configuration Wizard
Now all the elements related to connectivity are set, and it’s still possible, through the button To Change, to still modify them.
If everything is correctly set, select DONE.